Roofing shoes – Climbing on the roof can be a scary job, but it can also be dangerous if it happens to be a metal roof. Climbing around in its metal cover can easily damage the joints between sheets and cause leaks to occur inside. If you are trying to verify leaks or damaged sections of the roofing, you can minimize the possibility of causing damage by using a board to walk on metal roofs. The Board will distribute its weight through an area larger than its feet.
Select the best shoes for roofing with soft, lightweight rubber soles that will not be prone to sliding on the roof. Prepare your equipment on the ground before attempting to climb to your roof. Make sure your rope is ready to connect to a selected point close to the top of the roof. Some places to fix the rope as a chimney or exhaust pipe for a natural gas appliance. Where you connect the cable, make sure you can support your weight if it falls accidentally.
Place the ladder below the point where you want to climb to the roof. You must select the terrain that is the level and it will not cause your ladder to change as you climb. Select a stable location free of any danger such as electrical cables, cable lines or doors. Carry your equipment up the metal roof boots ladder and place it on the roof.