Quartz tile flooring – If you start a home improvement project, maybe one of the first points on the list to pull up a tile floor. If you do not care about the mess you can simply crush and powder the plates with slurry, but more likely you want to lift the slabs. As long as you have access to some basic tools, you should not have too much trouble lifting the old tile floor. Just be sure to wear protective gear and clothes.
Put on goggles, gloves and long sleeved sweaters and trousers. Rubbish from the plate may potentially damage, so cover your body with the correct tool. Place the edge of the filler on one of the joints or joints between two plates. Press the other end of the flap with your hammer. You only want the edge of the plate to lift something. Place the blade of filler as far below the quartz tile flooring edge as you can when it emerges from the floor. Angle as far as possible to the floor, so it is almost parallel to the ground.
Repeat the filler with the hammer. Pull the filler up against the ceiling when it is left under the plate. The plate should lift as if it was on a hinge or it should be completely free from the floor. Repeat the process for the rest of the quartz tile flooring. You will be able to angle your filler lower on the floor and can usually lift the tiles with a faucet. Use a spit for some stubborn tiles that will not fold away from the flap. Place the edge of the cutter under a corner of the tile and press down to raise it.