Window coverings are equivalent to a house’s eye-catching necklace for a woman’s eyes. They add that final touch to a house and pull together for a polished and well-planned look. Addition of a kitchen valances over a kitchen window will give the room a personalized look while exuding a warm and homely atmosphere. The installation of a kitchen window valance can be completed in a short period of time and with relatively few tools.
Although an extra pair of hands is always useful. Determine where to install the kitchen curtains rod. The rod can be installed directly on the window frame or on the wall approximately 1 to 2 inches above and from either side of the window frame. Measure and mark the location of the mounting brackets. Use a tape measure to determine the location of the mounting brackets on each side of the window. Installation of the supports. Hold the support in the mark place and drill the screws in the wall. Repeat for the second side.
Fix the valance rod. Run the shaft of the rod through the opening of the custom made curtains fabric and gently place each end into the installed wall brackets. Establish a level on the top of the installed valance rod to make sure it is level. If on the one hand, it is significantly higher than the other, remove the rod, unscrew a support and measure again before screwing the support into the wall.