One of the most common problems in our bathrooms is having a basement toilet pump that does not work well; this produces large losses of water that at the end will be reflected in losses of money. Remember that the pump of the toilet works with a rod and valve of filling, the advisable thing, when having the problem with one of these, is to change the pieces in group.
How to basement toilet pump? Here you will learn to do it in the right way and without difficulties. Go ahead and do it with Teacher! Cut the water supply in the toilet works the key usually turns to the right. Unload the tank by pulling on the lever. For the remains of water use the sponge or old towels until the tank is completely empty.
Remove the lower hose connected to the toilet by unscrewing the nut on the valve, this can be done with the help of the pressure clamp or with your hands. Now remove the damaged valve upwards and place the new valve in position of the previous one for its correct installation. Reconnect and tightly screw the water supply hose to the fill valve, remember that this is in the bottom of the toilet. Finally, open the water tap, and basement toilet pump diy is done!